Troubleshooting
15
Inserting and removing the battery
− To insert the battery, slide it into the guide rail located at the bottom of the handle
until you hear and feel it click into place (see
Fig. B
).
− To remove the battery, depress the battery release and pull out the battery (see
Fig. C
).
Troubleshooting
Problem
Possible causes
Solution
The product does
not turn on.
The battery does not have
enough power.
Charge the battery.
The battery has not been in-
serted properly.
Slide the battery into the guide
rail on the product’s handle.
The battery must lock into place
with an audible and noticeable
click.
The direction switch
2
is in
the middle position.
Press the direction switch all the
way in the desired direction.
Cleaning and maintenance
WARNING!
Risk of injury!
Accidentally starting the product may result in severe injury.
− Remove the battery before performing any cleaning or maintenance work
on the product.
NOTICE!
Risk of damage!
Water or other liquids that have penetrated the housing may cause a short circuit.
− Never submerge the product in water or other liquids.
− Make sure that no water or any other liquids get into the housing.
