Storage
16
NOTICE!
Risk of damage!
Improper handling of the product can damage the product.
− Do not use any aggressive cleaners, brushes with metal or nylon bristles,
or sharp or metallic cleaning utensils such as knives, hard scrapers and
the like. They could damage the surfaces.
Cleaning
− Use a soft cloth or brush to clean the housing.
− Clean the vents and the area around the chuck as well.
− Remove dust by blowing it out with compressed air.
Inspecting the product
Check the condition of the product regularly. Among other things, check to make sure:
− that the switches are not damaged,
− that the accessories are in proper condition,
− the vents are unobstructed and clean. If applicable, use a soft brush to clean
them.
If you identify any damage, you must have it repaired by a specialist workshop
to prevent risks.
Replacing the carbon brushes
− If excessive sparking occurs, have the carbon brushes checked by a qualified
electrician.
− The carbon brushes may only be replaced by a specialist workshop or by quali-
fied specialists.
Storage
1. Clean the product thoroughly prior to storage (see chapter ‘Cleaning and
maintenance’).
2. If possible, store the clean product and accessories in the original packaging, at a
storage temperature ranging between 5°C and 20°C (room temperature), and in a
place which is not accessible for children nor exposed to heat.
