16
15
46CM Petrol Lawnmower
46CM Petrol Lawnmower
GB
IE
GB
IE
Assembly
Getting Started
2.
Assemble the lower handle (Fig 2)
2a Remove the packaging from the handle. Set the height
adjustment to the highest position, and align the lower
handle with the holes in the deck. Make sure the holes in the
lowerhandle are aligned with those in the support.
2b Fix the lower handle onto the deck firmly with use the
wrench.
2c Fix the upper handle onto the lower handle firmly using quick
release(6).
NOTE!
Make sure the rope guide is on the right handle, when you stand
behind the mower.
Lift the upper handle, and lock in place using the quick release
lever and tensioning bolts that are attached to the handle.
NOTE!
Make sure the lower and upper handles are firmly connected.
And that the cables are not twisted (Fig 3).
Pull on/off lever and gently pull the rope. Hook it around the
guide rope.
3. Assembling the hybrid collection box (Fig 4 , 5, 6)
Raise the safety flap and hook the hybrid collection box onto the
mower. Release the safety flap.
NOTE!
Always fit the hybrid collection box before starting the engine.
4. Fix the cable (Fig 7)
Ensure that the cables clips supplied are used to fix the cable to
the lower handle.
Getting Started
WARNING!
PREPARING TO OPERATE THE LAWNMOWER STOP !!!
DO NOT START THE ENGINE BEFORE ADDING OIL TO THE OIL
SUMP. WHEN ADDING, DON‘T EXCEED THE MAXIMUM LINE.
NOTE!
The following procedures and adjustments must be performed
before the engine is started. Do not attempt to make any of
these adjustments while the engine is running.
NOTE!
Always use high quality detergent oil classified SAE30 oil (or
equivalent eg 5W 30, often termed as 4 Stroke lawn mower oil).
Never use additives with recommended oil. To prolong the life
