background image

DEMOLITION BREAKER

Repair and Refurbished Goods 

or Parts Notice

Unfortunately, from time to time, faulty products are manufactured which need to be returned to 

the Supplier for repair.

Please be aware that if your product is capable of retaining user-generated data (such as files stored 

on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a 

portable media player, games saved on a games console or files stored on a USB memory stick) 

during the process of repair, some or all of your stored data may be lost.  

We recommend you save this data elsewhere prior to sending the product for repair.

You should also be aware that rather than repairing goods, we may replace them with refurbished 

goods of the same type or use refurbished parts in the repair process.  

Please be assured though, refurbished parts or replacements are only used where they meet 

ALDI’s stringent quality specifications. 

If at any time you feel your repair is being handled unsatisfactorily, you may escalate your com-

plaint. Please telephone us on "1300 855 831" or write to us at:

RossMac Pty. Ltd.

P.O. Box 261, Essendon North, Victoria, 3041

Telephone: 1300 855 831 (Monday - Friday 8:30am-6:00pm)

Email: support@scheppach.com.au

AFTER SALES SUPPORT

  

1300 855 831

 

support@scheppach.com.au

AU Hotline Costs: Local rate for landline calls*

*Charges may vary dependent upon network operator or mobile network provider.

5

YEAR

WARRANTY

TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

Summary of Contents for FERREX



















Reviews: