First use
13
First use
Checking the paper shredder and product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a sharp
knife or other pointed objects, you may easily damage the paper
shredder.
− For this reason, be very careful when opening the packaging.
1. Take the paper shredder out of the packaging and check whether the paper
shredder or individual parts exhibit damages. If this is the case, do not use the
paper shredder. Contact the manufacturer using the service address specified on
the warranty card.
2. Check to make sure that all contents have been received (see
fig. A
).
Operation
NOTICE!
Risk of damage!
Incorrect handling of the paper shredder may damage the motor or
the inner rollers.
− Avoid overloading the motor by not putting more than 6 sheets
of paper (80 gsm) into the slot at the same time.
− Do not shred formats larger than A4 or continuous paper.
− Unplug the device if the motor cuts out because of
overloading. Ensure that the slide switch is at OFF. Leave the
motor to cool for about 30 minutes to room temperature,
before you plug the shredder back in. You can then continue
with operations.
− Remove paper clips, staples and similar fixings before you start
shredding.
