14
AFTER SALES SUPPORT
AUS
1300 884 987
www.medion.com.au
MODEL: MD 17329 PRODUCT CODE: 13651 05/2020
Winding thread onto the bobbin
You can use the sewing machine to wind thread on to the bobbins
easily.
−
To do so, take the thread from the spool and route it around the
winding thread guide
3
to the bobbin.
The exact procedure for winding thread on to the bobbin is described
in the following points:
1. Place the spool of thread on the spool holder.
Use the second spool holder when working with fine thread, as
instructed in the previous section.
2. Route the thread from the spool around the winding thread guide,
as illustrated.
3. Feed the end of the thread through the hole in the bobbin, as
illustrated, and wind the thread around the bobbin a few times by
hand.
3
7
6
4. Place the bobbin on the spindle
6
with the side of the bobbin
containing the end of the thread facing upwards. Move the bobbin
spindle to the right towards the winding stop
7
until you hear it
click into place.
5. Hold on to the end of the thread and press the foot pedal. Once
some thread has been wound on to the bobbin, let go of the end of
the thread. Wind the thread onto the bobbin until the spindle stops
automatically.
Once the bobbin spindle has been moved to the right,
the sewing mechanism is disabled so that the needle
does not move while the thread is being wound onto
the bobbin.
Summary of Contents for Stirling Black Edition MD 17329
Page 50: ...Version V1 4 ...