15
AFTER SALES SUPPORT
AUS
1300 884 987
www.medion.com.au
MODEL: MD 17329 PRODUCT CODE: 13651 05/2020
6. Move the bobbin spindle to the left and remove the bobbin.
7. Cut the ends of the thread.
Removing the bobbin case
−
Remove the table extension.
−
Move the needle
23
to the highest position by turning the hand
wheel
8
and the presser foot and open the bobbin case
15
behind the accessories box
14
, as shown in the diagram.
−
Open the rocking arm of the bobbin case and remove it from the
machine.
−
When you let go of the rocking arm, the bobbin will fall out of the
bobbin case automatically.
Threading the bobbin case
−
Hold the bobbin between the thumb and index finger of your right
hand and leave about 15 cm of the thread hanging out.
−
Hold the bobbin case in your left hand and put the bobbin in the
bobbin case.
Check that the bobbin is inserted correctly and that it
can be turned clockwise in the case.
−
Put the end of the thread into the slit on the edge of the bobbin
case.
Summary of Contents for Stirling Black Edition MD 17329
Page 50: ...Version V1 4 ...