24
AFTER SALES SUPPORT
AUS
1300 884 987
www.medion.com.au
MODEL: MD 17329 PRODUCT CODE: 13651 05/2020
Sewing
General information
• Switch on the main switch
10
.
• When changing the stitch type, always move the needle to its
highest position.
• Push the fabric sufficiently far under the presser foot
26
.
Make sure there is a length of around 10 cm of the upper and lower
thread behind the needle.
• Lower the presser foot lever
20
. Holding the thread with your left
hand, turn the hand wheel
8
towards you and lower the needle to
the point on the fabric where you want to start sewing.
• Press the foot pedal – the more pressure you apply to the foot
pedal, the faster the machine will run. While sewing, guide the
fabric gently by hand.
• Sew a few reverse stitches by actuating the reverse lever
12
in
order to fix the first stitches in place.
Tip
If you are not sure whether the thread tension or stitch type,
for example, is correct, test the settings on a swatch.
The fabric will run through automatically under the presser
foot. It should not be held fast or pulled by hand, but should
only be gently guided so that the stitches go in the desired
direction.
Selecting the right needle
NOTICE!
Risk of damage!
Using a defective needle can cause damage to the
material.
Replace defective needles immediately.
The number indicating the needle thickness is written on the shaft.
The higher the number, the thicker the needle.
Summary of Contents for Stirling Black Edition MD 17329
Page 50: ...Version V1 4 ...