44
AFTER SALES SUPPORT
AUS
1300 884 987
www.medion.com.au
MODEL: MD 17329 PRODUCT CODE: 13651 05/2020
If the machine does not run perfectly and has not been
used for a long period of time, run the oiled machine
at high speed for about a minute with the front flap
closed.
Do not forget to first sew on a fabric scrap to absorb
any leaked oil.
TIP
These parts of the machine may need to be oiled more
frequently, depending on how often you use the machine.
Notes for service engineers
Tensioning the V-belt
NOTICE!
Risk of damage!
The motor or machine may be damaged if the V-belt is
too tight or too loose.
Always have the V-belt tension adjusted by a
specialist.
1. Undo the screw on the underside of the machine.
2. Open the side cover.
3. Loosen the two screws indicated in the diagram opposite, turning
each screw one revolution.
4. The motor unit can now be moved up or down in order to adjust the
tension.
Please note that the V-belt must have an allowance for clearance of
10 mm (or 3/8”).
5. Tighten the two screws again.
6. Close the side cover and screw it back on.
Summary of Contents for Stirling Black Edition MD 17329
Page 50: ...Version V1 4 ...