ALDI WORKZONE 10366, User Manual

99

9

tools with sharp cutting edges are less likely to bind and are easier 

to control. 

g)  Use the power tool, accessories and tool bits etc. in 

accordance with these instructions, taking into account the 

working conditions and the work to be performed. 

Use of 

the power tool for operations different from those intended could 

result in a hazardous situation. 

5)  Service

a)  Have your power tool serviced by a qualified repair person 

using only identical replacement parts. 

This will ensure that the 

safety of the power tool is maintained.

Tacker safety warnings

1.  Always assume that the tool contains fasteners.

 Careless 

handling of the tacker can result in unexpected firing of fasteners 

and personal injury.

2.  Do not point the tool towards yourself or anyone nearby. 

Unexpected triggering will discharge the fastener causing an injury.

3.  Do not actuate the tool unless the tool is placed firmly 

against the workpiece.

 If the tool is not in contact with the 

workpiece, the fastener may be deflected away from your target.

4.  Disconnect the tool from the power source when the 

fastener jams in the tool.

 While removing a jammed fastener, the 

tacker may be accidentally activated if it is plugged in.

5.  Use caution while removing a jammed fastener. 

The 

mechanism may be under compression and the fastener may be 

forcefully discharged while attempting to free a jammed condition.

6.  Do not use this tacker for fastening electrical cables.

 It is 

General safety warnings