AFTER SALES SUPPORT
21
1300 855 831
support@scheppach.com.au
MODEL: HCE2500 PRODUCT CODE: 64124 03/2019
AUS
HCE2500
Before Operation/Operation
Electrical connections
• Before you connect the high pressure washer to the power supply make sure that
the data on the rating plate are identical to the supply voltage.
• If you use any extension cables, make sure that they are suitable for outdoor use
and have large enough wires:
1 – 10 m: 1.5 mm²
10-30 m: 2.5 mm²
• Insert the power plug on the power cable into the socket outlet.
IX. Operation
m
Warning! Be prepared for the recoil force of the emitted water jet! Ensure
that you are standing firmly and that you are holding the gun (14) securely,
otherwise you could injure yourself or other people.
Never operate the high pressure washer with a closed water tap. Dry running
will damage the high pressure washer!
Using the gun (Fig.1/4)
1 Turn on the water tap entirely.
2 Switch on the high pressure washer with the On / off switch (4). Only ever switch
on the high pressure washer once you have connected all of the water pipes
and they do not leak. The motor switches on until the required pressure has
built up. After the pressure has built up, the motor switches off.
3 Press the security switch (C) to unlock the gun starting lever (D). The nozzle
operates by pressure and the motor switches back on.
4 Releasing the gun starting lever (D) causes the high pressure washer to switch
off. The system remains pressurised.
5 After using the high pressure washer press the security switch (C) to lock the
gun starting lever.
Usage of the accessories (Fig.4)
Foam sprayer (10): Fill the foam sprayer (10) with detergent. The width of the beam
can be adjusted by turning the nozzle (F). By turning the knob (E), the foam volume
can be adjusted.
Variable nozzle (15): This accessory is intended for ordinary cleaning works. The
water jet can be adjusted by turning the variable nozzle (15).
