Digital Inverter Generator with Pure Sine Wave
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. EP2800i • 09/2018 • 62007
(toll free)
AFTER SALES SUPPORT
(toll free)
Digital Inverter Generator with Pure Sine Wave
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. EP2800i • 09/2018 • 62007
28
29
Maintenance
Maintenance
Your generator should be kept clean and dry at all times. The generator
should not be stored or operated in environments that includes excessive
moisture, dust or any corrosive vapours. If these substances are on the
generator, clean with a cloth or soft bristle brush. Do not use a garden hose
or anything with water pressure to clean the generator. Water may enter the
cooling air slots and could possibly damage the rotor, stator and the internal
windings of the generator head.
Spark Plug
To ensure the engine is operating correctly, the spark plug must be properly
gapped and free of carbon deposits. Always check the spark plug cable is
firmly fitted to the top of the spark plug.
WARNING: Ensure the engine is switched off while undertaking
this task.
1. Pull the spark plug lead (19) off the spark plug (20) and then remove spark
plug (20) from the generator using the supplied spark plug spanner by
rotating in a clockwise direction (Fig Y).
2. Remove carbon deposits using a wire brush.
3. Check for discoloration on the top of the spark plug (20).
The standard colour should be a tan colour.
4. Check the spark plug gap. The acceptable gap should be between
0.6 – 0.8mm (Fig. Z).
CAUTION: Check that no foreign material, debris, or dust enters the
crankcase.
Replacement spark plugs are available from purchase from lawn mower or
small engine repair shops.
Z.
Y.
Maintenance
Periodic maintenance
Item
Remarks
Pre-operation
check (daily)
Initial 1
months
or 20Hr
Every 3
months
or 50Hr
Every 6
months
or 100Hr
Every 12
months
or 300Hr
Spark plug
Check condition, adjust gap and
clean. Replace if necessary.
•
Engine oil
Check oil level.
•
Replace.
•
•
Air filter
Clean. Replace if necessary.
•
Fuel extension
filter
Clean Fuel extension filter.
Replace if necessary.
•
Valve clearance
Check and adjust when engine
is cold.
•
Fuel line
Check fuel hose for crack or
damage. Replace if necessary.
•
Exhaust system
Check for leakage. Retighten or
replace gasket if necessary.
•
Check muffler screen. Clean/
replace if necessary.
•
Carburettor
Check choke operation.
•
Starting system
Check On/Off switch ignition
operation.
•
Decarbonisation
More frequently if necessary.
•
Fittings/
fasteners
Check all fittings and fasteners
correct if necessary.
•
Regular maintenance is most important for the best performance and safe operation.
Periodic Maintenance
