14
Preparation
IRE
GB
3. Push the lever of the quick release fastener
7
down and place the quick release
fastener on the adapter. Release the lever so that the adapter is firmly connected
with the quick release fastener.
4. Now supply the bike tyre with compressed air (see chapter „Use“).
Ball valves
You can use your compressor to supply balls (e.g. leather footballs) with compressed
air. Proceed as follows:
1. Mount the tyre fill gauge
8
and the connecting hose
6
(see chapter “Preparing
the adapter”).
2. Push the lever of the quick release fastener
7
down and insert the adapter for
ball valves
11
. Release the lever so that the adapter is firmly connected with the
quick release fastener.
3. Insert the adapter in the ball valve.
4. Now supply the ball with compressed air (see chapter „Use“).
Valves for pools, air mattresses and similar
You can use your compressor to supply pools, air mattresses and similar articles with
compressed air. Proceed as follows:
1. Mount the tyre fill gauge
8
and the connecting hose
6
(see chapter “Preparing
the adapter”).
2. Push the lever of the quick release fastener
7
down and insert the adapter
12
.
Release the lever so that the adapter is firmly connected with the quick release
fastener.
3. Fit the desired adapter on the adapter (see
Fig. F
).
4. Insert the adapter in the article valve.
5. Now supply the article with compressed air (see chapter „Use“).
Blow gun
You can use the compressor as a blow gun to clean dust and similar dirt out of cavities
or difficult to reach areas. Prepare the compressor as follows:
1. Fit the tyre fill gauge
8
on the quick coupling of the compressed air hose
4
(see
Fig. C
): Push the tyre fill gauge into the quick coupling so that it locks into place.
2. Screw the blow-out adapter
9
into the tyre fill gauge (see
Fig. E
).
3. Now you can use the blow gun (see chapter „Use“).
Summary of Contents for WorkZone WZK 183
Page 4: ...A B 1 2 3 4 6 5 7 10 11 12 9 8 4 Overview GB IRE...
Page 5: ...C D G E F 1 2 5 Use IRE GB...
Page 24: ...24 IRE GB...
