ALDI WorkZone WZK 183, User Manual

18

IRE

GB

Warranty

NOTE! 

Risk of damage!

Cleaning the compressor with unsuitable cleaners could 

damage it. 

− Do not use any aggressive cleaners, sharp or metal-

lic cleaning utensils such as knives, hard scrapers or 

similar. They could damage the surfaces.

− Do not place the compressor or the accessories in the 

dishwasher. 

1.  Turn the compressor off and pull the mains plug out of the socket before cleaning. 
2.  Let the compressor cool off completely.
3.  Remove the attached adapter by reversing the steps in the chapter “Preparing the 

adapter”. 

4.  Clean the compressor and the accessories

•  by wiping it off with a damp cloth and a small amount of soft soap. 
•  by blowing it off with the blow gun (see chapter “Using the blow-out adapter”).

5.  Once you have wiped the compressor off with a damp cloth, let all parts dry 

completely. 

You have successfully cleaned the compressor. 

Storage and transport

PLEASE NOTE! 

Risk of damage!

Storing the compressor improperly may damage it. 

− Depressurise the compressor before you stow or trans-

port it: Turn the compressor off and push the trigger. 

− The compressor and accessories must be completely 

dry before they are stowed and before transport. 

− Store the compressor so that it is not accessible for 

unauthorised persons, children and animals. 

− Store the compressor so that it is protected against 

sunlight, dust, dirt, frost and moisture. We recom-

mend that you use the original packaging for this.

− Only store and transport the compressor in an up-

right position. Do not tip it.