m
Important!
Always de-pressurize the equipment before carrying out any cleaning and
maintenance work! Risk of injury! To do so, use the tyre pressure gauge as a
blow-out pistol and press the trigger lever until no more air escapes.
11.1 Cleaning
•
Keep the equipment free of dirt and dust as far as possible. Wipe the equipment
with a clean cloth or blow it down with compressed air at low pressure.
•
We recommend that you clean the equipment immediately after you use it.
•
Clean the equipment regularly with a damp cloth and some soft soap. Do not
use cleaning-agents or solvents; these may be aggressive to the plastic parts in
the equipment. Ensure that no water can get into the interior of the equipment.
•
You must disconnect the hose and any spraying tools from the compressor be-
fore cleaning. Do not clean the compressor with water, solvents or the like.
12. Storage
m
Important!
Pull out the mains plug and ventilate the equipment and all connected pneumatic
tools. Switch off the compressor and make sure that it is secured in such a way that
it cannot be started up again by any unauthorized person.
m
Important!
Store the compressor only in a dry location which is not accessible to unauthorized
persons.
Releasing excess pressure
Release the excess pressure by switching off the compressor and using the com-
pressed air which is still left in the pressure vessel, e.g. with a compressed air tool
running in idle mode or with a blow-out pistol.
AUS
AIR FORCE
Maintenance&Cleaning / Storage
AFTER SALES SUPPORT
19
1300 855 831
support@scheppach.com.au
MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018
