background image

Explanation of symbols

The use of symbols in this manual is intended to draw your attention to possible 

risks. The safety symbols and the explanations that accompany them must be  

understood before using the device. The warnings in themselves do not remove 

the risks and cannot replace correct actions for preventing accidents.

 

Read operator manual. Before any use, refer to  

the corresponding section in this user manual.

Attention

! Hot parts! Keep your distance.

 

Wear hearing protection.

Beware of electrical voltage!

Caution

! The equipment is remote-controlled and  

may start-up without warning.

Prohibition

: Do not open the cock before the air hose is 

attached.

Symbol Category II: This device is equipped with dual in-

sulation and does not need to be connected to an earthed 

power socket.

AUS

AIR FORCE

Explanation of symbols

AFTER SALES SUPPORT

7

 

 

1300 855 831

 

support@scheppach.com.au

MODEL: AIR FORCE  PRODUCT CODE:  56102  02/2018

Attention!

These operating instruction provide places  

concerning your safety which are marked with  

this indication.

Caution!

Failure to follow these instructions may cause  

light to medium risk of injury.

Warning!

Failure to follow these instructions may cause  

danger to life or danger of serious injuries.

Summary of Contents for WORKZONE



















Reviews: