ALEAPOW MTM350B, Manual

- 04 -

Turn ON the laser tool:

●

Turn OFF the laser tool:

●

●

Note: The laser level can only be turned off when the pendulum/transit in its Locked Position.

Lines switching:

●

Switch to Pulse Mode:

●

Note: Laser level can work with Laser Receiver under pulse mode.

LED Power Indications:

Self-leveling Mode

●

●

Manual Mode

●

●

●

Pulse Mode

●

●

●

Note:

Due to product improvement

，

appearance and specifications may differ  Working distance varies 

depending on the operating environment.

Charging

The product is equipped  with 3.7V/5200mAh  lithium battery, which  is built-in  and non-removable. 

Please charge it if it can not be turned on or there is no power indication after starting up.

Please use charging adapter with DC 5V and 1A/2A to charge it, the charging port is the Type C port. 

The battery icon          will be displayed in scrollable way during charging process.

Operation Modes

Short press Power Button to turn laser tool ON

Step 1, Slide the pendulum/transit switch to the Locked Position.

Step 2, Press the power button and hold for 2 seconds to turn the laser tool OFF.

Short press the power button repeatedly to switch the composition of different laser lines.

Press the pulse button "P" to turn the Pulse Mode on

is enabled when the pendulum/transit is switched to the unlocked position.

The laser beam(s) blink fast when tool is out of self-leveling range(4°±1°).

is enabled when the pendulum/transit is switched to the locked position.

is enabled to position the laser tool at various angles to project non-level straight lines or points.

The laser beam(s) will blink about every 3-5 seconds to notify the user. Notice: The laser beam(s) 

projected in manual mode cannot be used as  a horizontal or vertical reference in nature

Under pulse mode, Laser tool can work with a laser detector for working in a brighter environment 

or a larger working distance

Press the pulse button "P" to turn on the Pulse Mode.

Press the pulse button "P" again to return back Normal Mode. Notice: The laser beam is dimmer in 

pulse mode.

LED

Capacity
75%-100%
50%-75%
25%-50%
0%-25%