Visit our website at
www.alemlube.com.au
or
www.alemlube.co.nz
NSW/ACT
TEL: (02. 9677 1555
FAX: (02. 9675 1155
QLD/PNG
TEL: (07. 3204 9166
FAX: (07. 3204 1224
VIC/TAS
TEL: (03. 8787 8288
FAX: (03. 8787 8266
WA
TEL: (08. 9302 4199
FAX: (08. 9303 2095
SA/NT
TEL: (08. 8241 7111
FAX: (08. 8241 7011
NZ
TEL: (09. 447 1007
FAX: (09. 447 1008
19
6603A Multi-Purpose Fluid Sprayer
APPLICATION
Industrial sprayer especially manufactured with highly resistant materials for use with animal and vegetable oils,
hydrocarbon-based solvents, lubricants and petroleum products in applications such as: brake cleaning, tar
removal from vehicle bodies and tools, machinery and motor cleaning, lubricant application; cleaning of car interiors,
degreasing, wood treatments, waterproofing and de-waxing vehicles etc.
Given the great variety of products in the market, Alemlube cannot guarantee the universal validity of its equipment.
In any case, we recommend using certified chemicals.
SETTING UP & SPRAYING
1.
Once the tank has been filled to the maximum level of 1 litre, screw the lid back on and pressurise the tank
using a pumping action 15 times.
2.
To commence spraying, press the handle as you go and offset pressure loss by giving more strokes.
3.
When refilling, depressurise the device to open by pulling the safety valve.
MAINTENANCE
1.
After each use depressurise the sprayer and clean it with water.
2.
In the event of a nozzle blockage, clean it with water and do not use metallic objects.
3.
In order to prolong the life of the joints, regularly apply some drops of oil or grease on the moving parts.
4.
To access the valve chamber (165), remove the cylinder guard by pulling it firmly.
5.
To access the rod’s O-ring (603), unscrew the piston and remove it until the O-ring is visible.
USES AND SECURITY REGULATIONS
1.
Always follow the instructions and dosages on the packaging labels that the manufacturer recommends for the
chemical product to be used.
2.
In order to avoid any swallowing of the product, do no eat, drink or smoke whilst handling the cleaning treatments.
3.
Do not use the spray on any person, animal or electric installation.
4.
Do not use the treatment when there is strong wind or extreme heat.
5.
In case of poisoning, seek medical advise, taking the labelling of the chemical product with you.
6.
Do not dump product or cleaning residues near water bodies, wells, etc... that will be utilised for use by
– human or animal consumption.
7.
Use appropriate safety equipment, mask, goggles, gloves, footwear etc in order to avoid contact of chemical
products with skin, eyes and mouth.
8.
Read the instructions for the sprayer before its use. Do not modify the sprayer. Do not connect it to an external
pressure source (manual use only). Do not obstruct or strike the safety valve. Do not use the sprayer if it is
damaged, deformed or altered from its original shape. Store the sprayer protected from frost and fierce heat
(between 5º and 30º C).
9.
Air pressure may be a dangerous factor, utilise the sprayer with caution.
