Visit our website at
www.alemlube.com.au
or
www.alemlube.co.nz
NSW/ACT
TEL: (02) 9677 1555
FAX: (02) 9675 1155
QLD/PNG
TEL: (07) 3204 9166
FAX: (07) 3204 1224
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
WA
TEL: (08) 9302 4199
FAX: (08) 9303 2095
SA/NT
TEL: (08) 8241 7111
FAX: (08) 8241 7011
NZ
TEL: (64) 9 447 1007
FAX: (64) 9 447 1008
6 of 16
PRE-OPERATION CHECK
IMPORTANT
3) Connect the discharge hose.
Use a commercially available hose, hose connector and hose band. A short, large diameter hose is most efficient.
Long or small diameter hose increases fluid friction and reduces pump output.
NOTE
Tighten the hose band securely to prevent the under high pressure.
4) Check the engine oil level.
Check the engine oil level and replenish oil up to the neck if the pump is operated for more than 10 hours continuously.
CAUTION
• Engine oil is a major factor affecting engine service life. Detergent or vegetable oil is not recommended.
• Be sure to check the engine oil on a level surface with the engine stopped. Use 4-stroke automotive oil.
SAE 10W-30 is recommended for general use, all temperature use. If viscosity oil is used, select the appropriate
viscosity for the average temperature in your area.
5
3) Connect the discharge hose.
Use a commercially available hose, hose connector and hose ban
large-diameter hoseis most efficient. Long or small
and reduces pump output.
Tighten the hose band securely to prevent th
underhigh pressure.
4) Check the engine oil level.
Every 10 hours, check the engine oil level and replenish oil up to th
neck ifthe pump is operated for more than 10 hours continuously.
Engine oil is a major factor affecting engin
service life.Detergent or vegetable oil is not recommended.
Be sure to check the engine oil on a level surface with the engine stopped.
Use 4-stroke automotive detergent oil.
SAE 10W-30 is recommended for general use, all temperature use. I
is used,select the appropriate viscosity for the average temperature in your area.
SAE Viscosity Grades
Use a commercially available hose, hose connector and hose band. A short,
is most efficient. Long or small-diameter hose increases fluid friction
Tighten the hose band securely to prevent the hose from disconnecting
Every 10 hours, check the engine oil level and replenish oil up to the top of the oil filler
the pump is operated for more than 10 hours continuously.
is a major factor affecting engine performance and
getable oil is not recommended.
Be sure to check the engine oil on a level surface with the engine stopped.
general use, all temperature use. If single viscosity oil
select the appropriate viscosity for the average temperature in your area.
SAE Viscosity Grades
5
3) Connect the discharge hose.
Use a commercially available hose, hose connector and hose ban
large-diameter hoseis most efficient. Long or small
and reduces pump output.
Tighten the hose band securely to prevent th
underhigh pressure.
4) Check the engine oil level.
Every 10 hours, check the engine oil level and replenish oil up to th
neck ifthe pump is operated for more than 10 hours continuously.
Engine oil is a major factor affecting engin
service life.Detergent or vegetable oil is not recommended.
Be sure to check the engine oil on a level surface with the engine stopped.
Use 4-stroke automotive detergent oil.
SAE 10W-30 is recommended for general use, all temperature use. I
is used,select the appropriate viscosity for the average temperature in your area.
SAE Viscosity Grades
Use a commercially available hose, hose connector and hose band. A short,
is most efficient. Long or small-diameter hose increases fluid friction
Tighten the hose band securely to prevent the hose from disconnecting
Every 10 hours, check the engine oil level and replenish oil up to the top of the oil filler
the pump is operated for more than 10 hours continuously.
is a major factor affecting engine performance and
getable oil is not recommended.
Be sure to check the engine oil on a level surface with the engine stopped.
general use, all temperature use. If single viscosity oil
select the appropriate viscosity for the average temperature in your area.
SAE Viscosity Grades
SAE VISCOSITY GRADES