Alen BreatheSmart FIT50, User Manual

7

www.AlenCorp.com   1-800-630-2396

KNoW YoUR AIR PURIfIER

When using the air purifier for the first time in a room, we recommend that you use a higher fan 

speed like speed three (3) or Turbo (T), for at least two hours in order to clean the room’s air 

initially. Then, we recommend that the air purifier run continuously on speed two (2) or three (3) 

or be set on automatic mode.

Features

• 

HEPA style filtration captures dust, allergens and airborne pollutants

• 

Ionizer charges smaller particles, causing them to clump together for improved filtration

• 

4 fan speeds with a 2, 4, & 12  hour timer to control air circulation

• 

Automatic mode sets speed for optimal performance

• 

Filter change indicator light keeps replacements on schedule

• 

Simple and intuitive touch button controls

• 

Auto-off safety feature when front cover is removed

• 

Filter designed for easy replacement

CAre & MAInTenAnCe

Turn The Lights off/on

To turn the lights off on your unit, press the      Power Button. The lights will go out but the unit 

will not turn off. Press any button to turn the lights back on, or press the      Power Button a 2nd 

time to turn the unit off completely.

replacing The Filter

The Filter Indicator has 3 lights: Green, Yellow and Red. The Green light will be illuminated for 

most of the life of the filter. Yellow light will come on shortly before your filter should be replaced. 

This is the ideal time to order a new filter. You may order a new filter at www.alencorp.com/filters 

or by calling 1-800-630-2396. The Red light will be illuminated when it is time to replace the 

filter.

The filters used in Alen Air Purifiers are not designed to be washed, cleaned or otherwise 

reused. Over time, the filters become overloaded with particles, decreasing their filtration per-

formance. We recommend regular filter replacements to extend the life of your air purifier and 

maximize performance.

The black foam layer of the filter, known as the Pre-Filter, captures large dust and hair. This 

layer is held on with Velcro

®

. Once removed, the Alen Pre-Filter can be washed or vacuumed to 

maintain efficient operation of the unit.

Reset the filter Indicator

After replacing the filter, hold the FILTER button down for 5 seconds. The Red light will be reset 
to Green.