8
Program Mode:
The program mode is designed to program fan speed changes at certain times
throughout the day.
1. Press and hold PROGRAM key
for 2 seconds to enter setup mode.
The unit will beep and the clock will then start to blink. The CURRENT TIME
will turn on.
2. Press +/- to change the time.
3. Press the PROGRAM key
to accept the current time. The CURRENT
TIME
turns off, the SETTING 1 icon turns on, and the clock starts blinking
again.
4. Press +/- to change the time for SETTING 1.
5. Press the PROGRAM key
to accept this time.
6. Press the SPEED key to change the fan speed for SETTING 1.
7. Press the PROGRAM key to accept the fan speed.
8. Press +/- to change the time for SETTING 2.
9. Press the PROGRAM key
to accept this time.
10. Press the SPEED key to change the fan speed for SETTING 2.
11. Press the PROGRAM key to accept the fan speed.
12. Press +/- to change the time for SETTING 3.
13. Press the PROGRAM key
to accept this time.
14. Press the SPEED key to change the fan speed for SETTING 3.
15.
Press the PROGRAM key to accept the fan speed.
PROGRAM MODE
Summary of Contents for Paralda
Page 1: ...HEPA AIR PURIFIER USER MANUAL ...
Page 12: ......
