background image

aleo solar GmbH

 | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | 

info@aleo-solar.com

  

 

Installation manual Ver. 4.8, 05/2021, en   

Page 4 of 20

 

4  Explanation of safety guidelines 

This is the danger symbol. It is used in several versions 
in this manual to alert you to the potential risk of per-

sonal injury. 

 
 

4.1  Warnings and advices in this manual 

The danger warnings are structured as follows: 

Type  and  source  of  danger:  Possible  consequences  of  non-
observance. 

 

Measures or prohibitions to avoid danger 

 

 

DANGER  indicates  an  imminently  dangerous  situation  which 

inevitably leads to death or serious injury if not avoided. 

 

___________________________________________________ 

 
The information on warning and cautions is structured as follows: 

Type  and  source  of  danger:  Possible  consequences  of  non-
observance. 

 

Measures or prohibitions to avoid danger 

 

 

WARNING! 

WARNING  indicates  a  potentially  dangerous  situation  which  can 
lead to death or serious injury if not avoided. 

 

 

CAUTION! 

CAUTION indicates a potentially dangerous situation which can lead 
to slight or semi-serious injury if not avoided. 

 

___________________________________________________ 

 
WEIS 

 

NOTE indicates a  potentially  dangerous  situation which can  cause 

material damage if not avoided. 

4.2  Notes on modules 

The following symbol is attached to the modules: 

If  this  symbol  also  appears  on  a  danger  or  warning 
product label, it is warning you of the danger caused 

by electric current or voltage which can lead to per-
sonal injury if you fail to observe the instructions. 

 

 

5  About this manual 

This manual is release 4.8 with the issue date 05/2021. The publica-
tion  of  this  manual  renders  all  previous  releases  of  this  manual 

invalid. 
 

aleo solar constantly strives to improve its products and their doc-
umentation.  Therefore,  we  advise  you  to  always  use  the  latest 

version of the manual. 
Hand over this installation manual to the operator after installation 

and ensure you have confirmation of receipt. 

 
 

5.1  Detailed information for installers and planners 

5.1.1 

Information on the aleo solar website 

You can find the latest release of the installation manual and addi-

tional information on aleo solar’s website: 

www.aleo-solar.com

 
Always use the latest version for your modules if you find a more 

recent release of the manual. 
 

 

5.1.2 

Information sources for operators 

If you have any queries about the latest release, contact your aleo 

solar specialist  partner or  aleo solar  directly (see  chap. 2.2:  „Con-
tact“). 
 

 

Summary of Contents for P23





















Reviews: