Aleratec 1:27 USB Copy Tower SA, Quick Start Manual

www.aleratec.com

10

Using the USB Duplicator

Asynchronous Copying

 - continued 

2.  Press the 

OK

 button on the display panel. The USB Duplicator will start to read 

the source content into the system’s buffer and immediately start copying to 

any loaded target USB flash drives.

3.  Load the blank target flash drives into the USB Duplicator. The LCD will 

display the number of blank media loaded and copying.

Note:

 When copying is in process the Green LED on the front panel is 

blinking. Do not take out the drive while it is copying. When copying 
is finished the Green LED stays on (no blinking). If an error occurs 
during the copy process a Red LED will display. 

4.  As finished drives are removed, and new blanks inserted, the display will show 

the number of copies completed and the number of USB flash drives still in the 

copying process. If the Copy fails, the LCD will display the number of flash 

drives that failed and passed.

Note:

 During Asynchronous Copying you can use the 

UP

 and 

DOWN

arrow keys to check each flash drives copying status. 

USB(953M) 

93M

Reading...

OK

ESC





Pass: 0 

Working

Fail: 0               3

OK

ESC





Pass: 5 

Working

Fail: 0               2

OK

ESC



