www.aleratec.com
11
Using the DVD/CD Copy Tower Pro HS
Inserting Discs
1. Press the Eject button on each drive for which you’ll be inserting a disc.
2. Place the disc in the tray. The printed (non-shiny) surface of the disc
should be up.
3. To close the tray, press the Eject button or lightly push the front center
of the tray.
Note:
• Never place two discs in the tray at the same time.
• Do not touch the surface of the disc where it has been recorded.
Ejecting Discs
Disc copies will Auto Eject upon completion of a successful copy. Discs can
also be manually ejected from the drives.
1. Press the drive’s Eject button.
2. Carefully lift the disc from the tray.
3. To close the tray, press the Eject button or lightly push the front center
of the tray.
Note:
• After the tray has been ejected and the disc has been removed or
placed onto the tray, make sure to close the tray to its original position
to avoid the accumulation of dust or miscellaneous items inside the
tray.
• In case of emergency, insert the straightened end of a large paper clip
or similar rigid object into the Emergency Eject Pinhole to open the
tray. Then gently pull the tray out.
Summary of Contents for 1:3 DVD/CD Copy Tower Pro HS
