www.aleratec.com
4
Shredder Operation
This shredder is equipped with an Auto Start/Stop smart sensor, which allows the
unit to automatically start when a DVD or CD is placed into the feed opening and
stop as soon as the item travels completely through the feed opening.
Troubleshooting
Index
Abnormalities
Causes
Countermeasures
1
The machine doesn’t
work when a CD is
pushed into the entrance.
The CD is not of the
1.
common size.
The “I” side of the
2.
switch is not pushed
down.
Must put right sized
1.
CD in the machine
Push down the “I”
2.
side of the switch.
2
After working for some
time, the machine can
not operate normally.
Locked rotor makes
the motor overheated
and then temperature
protection set takes
action.
Unplug the shredder
from the outlet, and let
the machine rest for 15
minutes.
3
The machine does not
finish operating when
the CD is completely
out of the exit.
After the operation the
CD gets deformed.
Remove the CD from
the exit. (The machine
will stop then.)
4
The CD is jammed in
the machine and the
machine stops operating.
For some reason, the CD
gets deformed during
the operation.
Just put another CD
into the entrance. (The
machine will restart
its operation and the
jammed one will get
out.)
Specifications
Shredding Capacity
1 DVD or 1 CD
•
Shred Type
Strip Cut
•
Shred Size
34mm
•
Feed Opening
126mm
•
Weight
3.6 lb (1.6 kg)
•
Dimensions
(W x D x H)
191 mm x 127 mm x 127 mm
•
(7.5 in. x 5.0 in. x 5.0 in.)
•
Power Requirements
120 Volt AC, 60Hz, 1.4 Amps
•
Duty Cycle
300 discs on, 15 minutes off
•