www.aleratec.com
30
Using the USB Duplicator
7.5 Ignore Size
- continued
Use the
1.
UP
or
DOWN
arrow to scroll through the menu until Setup is
displayed on the LCD screen. Press the
OK
button to select or press
ESC
to go to the next setting.
Use the
2.
UP
or
Down
arrow to scroll through the options until Ignore
Size is displayed on the LCD screen. Press
OK
.
Default setting is 3% ; press the arrow keys to change and press
3.
OK
.
Note: Source flash drive and blank drives need to be the same capacity for two reasons.
During the copy process the source flash drive “index sector” is copied to
1.
the target flash drive. The index sector of a flash drive contains the drives
specifications, size and FAT table. Different drive sizes will have different index
sectors. For example if your are copying a 2G source flash drive to a 4G target
flash drive without performing data transforming, the index sector of the 2G
source would be copied to the 4G target flash drive effectively changing it to a 2G
flash drive because of the copied 2G index sector.
If you allow the system to execute data transforming from a source flash drive to
2.
multiple target flash drive in addition to longer copying time there is a potential for
data loss during data transforming.
Note: If you need to copy a source flash to a target with a big capacity difference there
are two ways to avoid potential problems.
Use the Setup function Ignore Size to increase the tolerance % of the source and
1.
target.
Turn the Setup function Analyze Source to OFF.
2.
ESC
OK
USB Duplicator
7. Setup
ESC
OK
7. Setup:
5. Ignore Size
ESC
OK
Ignore Size
3%
