www.aleratec.com
25
Using the USB Duplicator
6.5 Full Erase USB
Full Erase USB is a function what will erase all data on the target USB flash
drive.
Note:
The Full Erase USB will completely erase data of each of the target
flash drives This function will also clear the FAT table in the flash drive.
You will not be able to read the flash drive on PC until it is re-formatted.
1. Use
UP
or
DOWN
arrow to scroll through the menu until Utility is
displayed on the LCD screen. Press the
OK
button to select or press
ESC
to go to the next setting.
2. Press
OK
and scroll to Full Erase USB. The LCD will display the
following status:
3. Press
OK
to select. The LCD will display the following status:
Press
OK
for Yes or
ESC
for No.
4. LCD display will show the following screen when finished.
6.6 System Update
This function is used to update your systems firmware. (Contact Aleratec
Technical Support for the latest version.)
ESC
OK
USB Duplicator
6. Utility
ESC
OK
6. Utility
5. Full Erase USB
ESC
OK
Do Erase All
Confirm?
ESC
OK
Pass: 2
Working
Fail: 0
0
