MinkPolice User Manual
EN - 6
soon as the trap door shuts. The module can also be configured to
epo t a I’ ali e status o e o
two times per day.
11.2
History
By clicking on a trap in the Trap Overview you can get a historical
overview of all reports a module has ever sent. Next to each report
you can see the battery level and signal strength of the module at
the given time.
In cases where the trap has been released you can register the catch
by clicking on Register catch next to the report. The catch is stored
in our database and can be drawn out for statistics if you have given
permission to this.
Register catches from other traps on your profile
On your profile you can register traps which do not have a
MinkPolice module on them, you can register what you have caught
in these traps, and you can place them on the Trap Map. To register
such a trap, click on the button Register New Device. During
registration, select the option Trap without MinkPolice module.
11.3
Settings
Click the menu button Settings. A number of tabs now show up.
Below is a short introduction to each tab.
Remember to click Save Settings after making changes.
Message settings
Here you can either add or delete email addresses and telephone
numbers that are to receive reports about the status of the modules.
You can also choose one of the following models for reporting:
-
Only alarm/alert notifications. With this setting you will only
receive an SMS/email if the trap is shut or if a module does not
report as expected (e.g. due to low battery).
-
One status report per day plus an immediate notification on alerts.
With this setting you will receive one report (email and/or SMS)
