DFX send, and not to the Main outs, adds character to the reverb,
etc.
Mix Mode
-The 'Soft Pot' number 3, MIDI Channel, selects which
Mix Channel Andromeda's keyboard will play as Local.
-To select a Program in a Mix Channel, select a Mix
and then click upon the desired Channel button
(1->8 Shift 9->16). A flashing LED will indicate whether
the channel is active. Channels respond the same
way as Mods; click once to select, click twice to
Enable. Then, press Soft Button 6, "Prog". You are
now on a page where you can enter the Program
via the numeric keys or by pressing Soft Button 2,
"Directory" and scrolling through it, or by using the Bank, Program
Group and Program Number buttons. .
-Programs are live on the front panel upon Mix
Channel selection, and can be edited while the
other Channels play. You may edit all Programs
in a Mix as there are (of course) 16 edit buffers.
You may Store an edited Program back to it's
Program Bank location by simply pressing Store
twice. You can only store the edited Program if you are on a page
that is directly related to the Program; if you see Mix-level
parameters in the display and press Store, you will see a prompt
relating to Storing the Mix.
-You may solo a Mix Channel by pressing SOLO (soft button eight
when on the top Mix level).
-Effects are per Mix, and can be Copied from Programs
or other Mixes. They are not selected through their
associated Program's Channel as on the QS series. To Copy the FX
of a Program into a Mix, press Store once, press soft button three
“COPY”, use soft pot one to select what you want to Copy, use soft
pot two and three to select the Bank and Program you want to Copy
from, press Copy and then press Store to finish the procedure.
-Effects are created in a Mix in the same manner as
in Program, by using the Effects buttons and pages.
However, the Send and Pan settings are -per
Channel-. Select different Channels and enter the
desired send amount for each selected Channel in the FX window.
-A Program Change on a MIDI channel will change
all Programs that share that channel. There will
be a Prog Chg parameter in the CNTL page of each
Mix Channel which will allow defeating Prog Chgs
if so desired.
Arpeggiator and Sequencer
-
