7.
Press and release the footswitch connected to the
“DOWN” footswitch inputs
8.
Press and release the footswitches at the same time.
9.
Press and release VALUE knob
10.
Rotate VALUE knob to the right(clockwise)
11.
Rotate VALUE knob to the left(counterclockwise)
12.
Turn DRIVE knob slowly all the way to the right
13. Repeat step 12 for BASS and TREBLE knobs
Verify the display shows “PL”
Verify the display shows “Pb”
Verify the display shows “ES”
Verify the display shows “E” and a symbol of LED
segments rotating to the right(clockwise)
Verify the display shows “E” and a symbol of LED
segments rotating to the left(counterclockwise)
Verify the display value increases evenly to “99”
Verify the display value increases evenly to “99”
14. Rotate EFFECT knob all the way to the right, then
back to the left (so the indicator points to "PLAY").
Verify that display shows ‘S0’ and does not flicker
15.Rotate EFFECT knob one click to the right (so the
indicator points to "COMP/LIMIT").
Verify that display shows ‘S1’ and does not flicker.
16.
Rotate EFFECT knob one click to the right (so the
indicator points to "DIST").
Verify that display shows ‘S2’ and does not flicker.
17.
Rotate EFFECT knob one click to the right (so the
indicator points to "DRIVE")
Verify that display shows ‘S3’ and does not flicker
18.
Rotate EFFECT knob one click to the right (so the
indicator points to "EQ").
Verify that display shows ‘S4’ and does not flicker
19.
Rotate EFFECT knob one click to the right (so the
indicator points to "NR").
Verify that display shows ‘S5’ and does not flicker
20.
Rotate EFFECT knob one click to the right (so the
indicator points to "CAB").
Verify that display shows ‘S6’ and does not flicker
21.
Rotate EFFECT knob one click to the right (so the
indicator points to "FX1").
Verify that display shows ‘S7’ and does not flicker
22.
Rotate EFFECT knob one click to the right (so the
indicator points to "PARAM").
Verify that display shows ‘S8’ and does not flicker
23.
Rotate EFFECT knob one click to the right (so the
indicator points to "FX2").
Verify that display shows ‘S9’ and does not flicker
24.
Rotate EFFECT knob one click to the right (so the
indicator points to "PARAM").
Verify that display shows ‘SA’ and does not flicker
25.
Rotate EFFECT knob one click to the right (so the
indicator points to "FX3").
Verify that display shows ‘Sb’ and does not flicker
26.
Rotate EFFECT knob one click to the right (so the
indicator points to "PARAM").
Verify that display shows ‘SC’ and does not flicker
27.
Rotate EFFECT knob one click to the right (so the
indicator points to "DIGFX").
Verify that display shows ‘Sd’ and does not flicker
28.
Rotate EFFECT knob one click to the right (so the
indicator points to "LEVEL").
Verify that display shows ‘SE’ and does not flicker.
29.
Rotate EFFECT knob one click to the right (so the
indicator points to "ROUTE").
Verify that display shows ‘SF’ and does not flicker
To restore factory preset.
Summary of Contents for BASSFIRE 60
