background image

 

 

31

 

 

 

5.1C

  Continue, Re-start, or Jump to Next Song Step 

 

• In Compose mode, if you stop a Song and then press PLAY, the Song will continue 
from the first beat of the Pattern that was playing when STOP was pressed. 

• In Perform mode, if you stop a Song and then press PLAY, the Song will re-start from 
the beginning.  

• In either Compose or Perform mode, press PLAY while the Song is playing to 
immediately jump ahead to the next Song step. Its associated Pattern will begin on the 
downbeat. This is a convenient way to "fast forward" over certain parts of a Song. 

 

5.1D

  "Loop" a Pattern Indefinitely 

 

In Song Perform mode, pressing and holding FILL until the end of a song step will 
cause that step to repeat. A footswitch plugged into the Count/A/B/Fill jack will perform 
the same function.  
 

Examples: 

Use this feature if a soloist decides to take another few bars. Another use is 

if two Songs share the same tempo. Follow the first Song with a blank Pattern, then 
append the second Song. Between Songs, hold down the footswitch on the blank 
Pattern song step, then release to start the second Song.  

 

5.1E

  Start from the Middle of a Song 

 

You need not start a Song from the beginning each time; in Compose mode, a Song 
can start at any Song step.  

 
1.

 Make sure the Performance Pad is in Compose mode, even if you don't plan to 

record anything.  

2.

 Use the INC/DEC buttons to select the Song step at which you want the 

Performance Pad to start playing. 

3.

 Press PLAY. The Performance Pad will start playing at the downbeat of the selected 

Song step. 

4.

 If you don't want to extend the Song length, go into Perform mode before reaching 

the end of the Song. If you do want to extend the Song length, remain in Compose 
mode. 

 

5.1F

  Name a Song (NAME) 

 

1.

 The Performance Pad can be in either Compose or Perform mode. 

2.

 Press RECORD SETUP. If the Song has been named, the name will show on the 

top line. If the Song has not been named, the display says 

NO NAME

.  

3.

 Enter the name using the PAGE UP/DOWN buttons to select the character to be 

changed, and the INC/DEC buttons to select the desired character. Lower case and 
upper case letters, numbers, punctuation, and various special-purpose characters are 
available. You can also enter numbers with the number buttons. 

 

5.1G

  Change Song Tempo as the Performance Pad Plays 

 

To change the Song tempo as it plays, press the TEMPO/PAGE UP button to increase 
the tempo, and the TEMPO/PAGE DOWN button to decrease the tempo. 

Summary of Contents for Performance Pad





















































Reviews: