4. Installation
4
3.1
Description
The Alfa Laval GJ 7 is a fluid-driven (turbine-driven) 360° rotary nozzle machine designed for cleaning the interior surfaces of a
wide variety of small process and storage barrels, drums or containers with a minimum opening of 1-½
“ (38.1 mm) in diameter.
It is powered entirely by the cleaning solution; it requires no electricity, compressed air or lubricant for operation. The Alfa
Laval GJ 7 is designed primarily for portable service; however, the unit may also be permanently installed in a vessel. If the
Alfa Laval GJ 7 is permanently mounted inside a tank, we strongly recommend inspecting the unit every few hundred hours of
operation. (See Chapter 6 - Maintenance for more information.)
WARNING: Under no conditions, whatsoever, should the Alfa Laval GJ 7 ever be immersed in anything, unless you
have prior approval from Alfa Laval Tank Equipment, Inc. Failure to comply with this restriction will void the warranty!!
In order to handle the broadest possible range of applications, the stainless steel Alfa Laval GJ 7 is available with dual or triple
nozzles, and an extensive selection of nozzle sizes, stators (non-rotating turbine) O-ring material and gear ratios. Alfa Laval
Gamajet nozzles are available in several interchangeable sizes ranging from 0.07
0" to 0.100” (1.7 mm to 2.5 mm). The Alfa
Laval Gamajet wash cycle time can be adjusted for special applications by changing the stators and nozzle size.
Interchangeable stators and nozzle sizes are available for either low or high pressures and/or flow rates. The performance
capabilities of these options are detailed in Chapter 7 Technical Data.
3.2
Intended Use
It is to be verified by the end-user:
-
that the tank cleaning machine is in conformity with respect to tank, vessel or container size in which it will be used.
-
that the construction materials (both metallic and non-metallic) are compatible with product, flushing media, cleaning media,
temperatures and pressure under the intended use.
3.3
Patents and trademarks
This Instruction Manual is published by Alfa Laval Tank Equipment without any warranty. Improvements and changes to this
Instruction Manual may at any time be made by Alfa Laval Tank Equipment without prior notice. Such changes will, however,
be incorporated in new editions of this Instruction Manual.
© Alfa Laval Tank Equipment. All rights reserved.
The Alfa Laval logotype is a trademark or a registered trademark of Alfa Laval Corporate AB. "Gamajet" is a trademark or
registered trademark of Alfa Laval Tank Equipment. The Alfa Laval GJ 7 product has patent in the US (US 6.123.271). Other
products or company names mentioned herein may be the trademarks of their respective owners. Any rights not expressly
granted herein are reserved.
3.4
Marking
Alfa Laval tank cleaning machines are all marked to allow recognition of machine type, machine name, Serial number and
manufacturing address. The marking is placed on the body of the tank cleaning machine.
Alfa Laval Tank Equipment
– Exton, PA
Patent #: 6,123,271
