Alfa Laval Optigo CD, Instruction Manual

AHE00046EN 1904

8

Alfa Laval is a trademark registered and owned by Alfa Laval Corporate AB. 

Alfa Laval reserves the right to change specification without prior notification. 

Always follow guidelines and instructions as given in the air cooler product manual AHE00042.

Optigo CD air coolers are delivered on a wooden pallet, either covered with a reinforced cardboard 

box (CD300) or a wooden crate (CD400). Handling and positioning can take place manually (small-

er models) or with use of a forklift. Packed air coolers may be stacked during transportation and 

storage.

Respect the maximum number of stacked air 

cooler units.

4  Unpacking and lifting

>50 mm

Lift the unit to mounting position and secure 

following instructions given in chapter "5 

Installation". After having secured the cooler, 

the forks may be lowered and the remaining 

packaging materials can be removed (cardboard 

CD300, crate for CD400).

max. 4

max. 2

In order to avoid damage to the air cooler or fall-

ing of the unit, ensure that the lifting forks cover 

all beams from the lower support pallet.

CD400 models are supplied in mounting posi-

tion. Prior to lifting and mounting, the top crate 

panel must  be removed and the mounting 

brackets must be turned 90° and fixed with the 

supplied fixing materials.

The smaller CD300 models must be turned. 

Place the unit on the ground and manually turn 

the air cooler into mounting position on a second 

wooden pallet. Keep the packaging material in 

place to prevent the drip trays from damaging. 

Remove the original support pallet (now on top) 

and remove the cardboard top sheet. The cooler 

is now ready to be lifted to mounting position.

CD300 only

Remove the plastic strips that secure the EC fan 

unit during transport and handling. The air cooler 

is now ready to be installed.

CD300 only