15
− GENERAL CLEANING AT THE END OF THE HEATING SEASON
Make sure that the stove and the ash are both cold
– switch off the stove from the power supply
At the end of the season, for safety purposes, switch of the stove from the power supply. It is very important to
clean and check the stove, as explained in the points above.
Make sure that the stove and the ash are both cold
After longer period of use, it may occur that the non-asbestos tape (lane) for sealing (gasket) on the door is
detached This seal is affixed to the door by using silicone resistant to high temperatures. In order to resolve this,
attach the back end (the back part of the tape) of the sealing tape by using glue which is resistant to high
temperatures. This is very important for good sealing of the door.
Figure 15
Figure 15. Spots that should be cleaned at least twice a year
6.3 SPECIAL MAINTENANCE
Your stove is a thermal generator that uses pellets as solid biofuel. For this reason special cleaning should be
performed once in a year.
The best is to perform the previously explained works at the beginning of the heating season.
The purpose of this special maintenance is to provide proper and efficient stove operation.
Figure 16
A - Remove the sheet metal cover and clean the internal part with a vacuum cleaner.
7.0 IMPORTANT SAFETY MEASURES
You have bought a product with the highest quality.
The manufacturer is always at your disposal to provide you all the information you need in regard to the stove and
the instructions for assembly and installation in your geographic conditions. Proper installation of the stove, in
accordance with the instructions given in this instruction manual, is necessary for the purpose of prevention of
danger, fire and any irregularities or malfunctioning.
The stove functions
with negative pressure in the combustion chamber.
For that purpose, make sure that the
smoke exhaust is well thermally sealed.
A
-sheet metal
cover
Spots that should be cleaned at
least twice a year.
