3
1.0 PURPOSE OF THIS INSTRUCTION MANUAL
The purpose of this manual is to enable the user to take over all necessary measures and prepare the entire
equipment and material in order to enable safe and proper exploitation i.e. usage of the stove.
1.1 UPDATING
These instructions represent a real piece of art at the moment when they are launched at the market. For this
reason the company ALFA PLAM does not take into consideration the stoves which are already in the market with
the corresponding technical documentation and considers them as deficient or inappropriate after any type of
modification, adaptation and application of new technologies to newly launched devices.
The contents of this instruction manual must be carefully read i.e. studied. You must strictly adhere to all instructions
given in this instruction manual. All information that this manual contains are necessary for installation, use and
maintenance of your stove.
For that purpose, this instruction manual must be carefully kept for the necessary instructions in case of some
problems or obscurities.
In the stove is given or sold to some other person, the new owner must also be given this instruction manual.
If you have lost this manual, you may ask for a new one from the manufacturer.
2.0 RESPONSIBILITY OF THE MANUFACTURER
By issuing this instruction manual, the company ALFA PLAM
does not accept any civil or legal responsibility,
directly and indirectly due to:
- accidents that occurred due to failure to meet the standards and specifications given in this instruction
manual,
- accidents that occurred due to improper handling or use of the stove by the user
- accidents that occurred due to modifications and repairs which have not been approved by the company
ALFA PLAM,
- bad maintenance
- unpredictable situations
- accidents that occurred due to application of unoriginal or incompatible spare parts which are not
intended for this model of stove.
The installer – technician assumes full responsibility for the installation.
2.1 BASIC CHARACTERISTICS OF THE USER
The user must have the following basic characteristics:
− he/she should be an adult and responsible person,
− he/she should have certain technical knowledge that is required for routing maintenance of the electrical and
mechanical components of the stove.
CHILDREN MUST NOT COME NEAR TO THE STOVE, OR PLAY WITH IT WHILE IT'S WORKING.
2.2 TRANSPORTATION AND USE OF THE STOVE - HANDLING (MANIPULATION)
While the stove is used, you must make sure that the stove does not lean forward. This is because the center of
gravity of the stove is positioned forwards.
During movement of the stove, which must be entirely safe, make sure that the forklift has carrying capacity which is
bigger than the weight of the stove that it needs to lift. Avoid pulling and sudden moves.
ALL PACKAGING SHOULD BE REMOVED AND FAR FROM THE REACH OF CHILDREN SINCE THE
MATERIAL WHICH IS PART OF THE PACKAGING MAY CAUSE SUFFOCATION. THIS INCLUDES PLASTIC
BAGS, FOILS, POLYSTYRENE ETC.
2.3 RESPONSIBILITY OF THE INSTALLER
The responsibility of the installer
is to execute all checks of the flue pipe, the air suction i.e. the air inlet, as well
as all solutions required for mounting (installation) of your stove.
The responsibility of the installer is
to coordinate the stove with the local legal regulations that apply in the place
where the stove is mounted (installed).
The application of the stove
must be in accordance with the instructions that are given in this instruction manual
for use and maintenance as well as all safety standards that are given with the local legal regulations that apply in
the place where the stove is mounted (installed).
The installer must
verify (confirm):
− the type of stove which is installed,
− the appropriateness of the room where the stove is installed, which is expressed as a minimal value required for
mounting, and which is stipulated by the stove manufacturer,
− the instructions of the thermal generator manufacturer that refer to the requirements of the smoke exhaust system
(lines and pipes for smoke exhaust),
