11
Besides being obliged to adhere to all safety measures, maintenance workers must:
− Always use security devices and personal protective equipment.
− Turn off the electric power supply before they start working.
− Always use adequate tools.
− Ensure that the stove and ash are completely cool before starting any operations on the stove.
Especially, take care that the handles are cool before you touch them.
−
NEVER START UP THE STOVE
even if only one of the security devices is faulty, improperly set or does not
function.
− Do not make any modifications for whatever reason except those allowed and explained by the manufacturer.
− Always use original spare parts. Never allow the components to completely wear out before you replace them.
Replacing a worn out part i.e. component of the stove before it breaks down contributes to the prevention of
injuries caused by an accident due to a sudden breakdown i.e. failure of the component that may cause serious
human injuries and damages to the property around the stove.
− Clean the firebox before lighting the stove.
− Check whether any condensation has occurred. If any condensation occurs, this indicates that there is some
water from smoke cooling. We recommend you to find possible causes in order to establish a normal and proper
work of the stove.
5.1 WARNING OF THE SAFETY MEASURES FOR THE USER
The place where the stove is to be put, called the installation place, must be prepared in accordance with local,
national and European regulations.
The stove is a ’’heating machine’’ and
during its operation, its outer surfaces are very hot i.e
.
they have
extremely high temperatures
, or they are rather hot.
This stove is designed to combust fuel made of pressed wood mass (pellets with a diameter of 6 mm to 7 mm,
length of about 30 mm and maximum moisture of 8-9%).
Because of this, during the use of the stove it is very important to observe the following warnings:
− Do not approach and touch the glass on the door, there is a RISK OF BURN INJURIES
− Do not approach and touch the flue pipe, there is a RISK OF BURN INJURIES
− Do not perform any kind of cleaning
−
Do not open the door as the stove functions properly only when it is sealed
− Do not remove ashes when the stove is in the operational mode
− Children and pets must be away from the stove
− ADHERE TO ALL THE REGULATIONS STATED IN THIS DOCUMENT – MANUAL.
In addition, for the proper use of biofuel pellets:
− Only use fuel which is in accordance with the manufacturer’s instructions,
− Always adhere to the stove maintenance plan,
− Clean the stove every day (only when the stove and ashes are cold),
− Do not use the stove if there are any failures or abnormalities, or in the case of unusual noise and/or suspected
breakdowns,
−
Do not throw or pour water on the stove, even in fire fighting,
−
Do not turn off the stove by pulling the plug out. Use the off button on the panel,
− The stove should not be inclined as IT MAY BECOME UNSTABLE,
− Do not use the stove as a support or holder. Never leave the tank fuel cover opened,
− Do not touch the painted parts of the stove while it is in operation,
−
Do not use wood or coal as fuel, but
only fuel pellet
with the following characteristics: diameter of 6-7 mm,
maximum length 30 mm, maximum moisture 8-9%,
− Do not use the stove for burning garbage,
− Always perform all the operations with maximum safety measures.
6.0 STANDARDS FOR SAFE LIGHTING AND CLEANING THE STOVE
− Never use gasoline, petroleum or any other combustible liquid for lighting the stove. Keep these kinds of liquid
away from the stove while it is in operation,
− Never light the stove if the glass is damaged. Never hit the glass or door as you may damage them,
− While the stove is in operation, do not open the door in order to clean the glass. The glass can be cleaned only
when the stove is cool, using a cotton cloth or paper towels (cloths) and a glass cleaning agent,
− Ensure that the stove is fixed well in order to prevent any movement,
− Ensure that the box for ashes is inserted and that it is completely closed, so that the door is properly leaned
against the inner box,
− Ensure that the stove door is tightly closed while the stove is in operation,