33
layer of sediment in
combustion
chamber. Hatch
glass is soiled and
the flame is weak.
2. Wet or inadequate wood pellets.
3. Smoke fan system motor is
broken.
check if all openings are open.
Clean chimney as well. Check if
the air intake is not clogged. Check
sealing cord on the hatch.
2Change wood pellet type.
3. Check motor and replace it if
needed.
Smoke blower motor
does not work.
1. Furnace power supply is
interrupted.
2. Motor is damaged.
3. Motherboard is damaged.
4. Control panel is not working.
1. Check the supply of the grids
and resistance to melting safety
device.
2. Check motor and capacitor and
replace if needed.
3. Replace electronic card.
4. Replace control panel.
Furnace works with
maximum capacity in
automatic mode.
1. Thermostat is set to the
maximum.
2. Room temperature thermostat
always measures cold air.
3. Temperature probe is damaged.
4. Control panel is damaged or out
of function.
1. Set thermostat temperature
again.
2. Change the probe position.
3. Check the probe and replace if
needed.
4. Check control panel and replace
if needed.
Furnace can not be
ignited.
1. Power supply problem.
2. Wood pellets robe is blocked.
3. Pressure stat does not work
(reports blockage).
4. Smoke fan or chimney is
clogged.
1. Check if the plug is plugged in
and if the main switch is fixed to
position “I“.
2. Unblock the probe by moving
thermostat in the rear. If blocks
again, replace the thermostat.
3. Replace pressure stat.
4. Clean chimney outlet.
Table 8
18.0 INFORMATION ON THE DISPOSAL (DISCARDING) AND DISASSEMBLY (DISMANTLING) OF THE
STOVE
The disassembly and disposal of (an old, used) stove is the sole responsibility of the owner of the stove.
The owner of the stove must observe the applicable legal regulations of his own country related to the safety and
protection of the environment. The disassembly and disposal of the stove may be delegated to a third party
provided that this third party is a company authorized for the collection and disposal of such materials.
NOTICE
:
In all cases you must observe the applicable legal regulations of the country in which the stove is
installed, related to the disposal of such materials (things) and, if necessary, report the disposal of such things.
CAUTION
The disassembly of the stove may only be performed when the chamber of the stove is not in operation and when
the stove is unplugged (there is no electric power supply).
•
Remove all the electric parts,
•
Discard the batteries of the electronic card and remote controller into adequate containers in accordance with
the standards,
•
Separate the batteries to be kept from the electronic card,
•
Disassemble the structure of the stove engaging an authorized company.
CAUTION
The disposal of the stove at public places represents a serious threat to people and animals. In such cases, the
owner shall be liable for any injuries of people and animals.
When the stove is disassembled, the EC mark, this Manual and any other documents related to the stove must be
destroyed.
19.0. TIME
OF GUARANTEED SERVICING
This implies the period during which we guarantee the service, accessories and space parts, starting from the day
of purchase of the device.
The time of guaranteed servicing is in accordance with the valid legal regulations.
In case of change of the model and the design of the device, the term for change of parts that have modified design
is within the legal term.
After this term we provide the modified parts in the new designs.
19.1. CONDITIONS OF THE GUARANTEE
The guarantee of the product is valid within the legally defined term.