34
The guarantee is not valid for the glass, the glass-ceramic panel and the physical damages that have
occurred after purchase.
THE MANUFACTURER RETAINS ALL THE RIGHTS TO MAKE CHANGES.
The device will properly function within the guaranteed term only if it is used in accordance with these guidelines for
connection and application.
The guarantee cases to apply if it is determined that:
-the connection or the repair of the product was performed by an unauthorized person, that is, if unoriginal parts
have been embedded,
- if the device has not been properly used in accordance with these guidelines,
- if some mechanical damaging of the device occurred during usage,
- if the repairs of defects were performed by an unauthorized person,
- if the device has been used for commercial purposes,
- if the damage has occurred during transportation after the device was sold,
- if the defects occurred due to improper mounting, improper maintenance or mechanical damaging by the buyer,
- if the defect occurred after too strong or insufficient power, as well due to force major.
We can repair the defects of Your device also outside the guaranteed period, with original spare parts for which we
also provide a guarantee under the same conditions.
This guarantee does not exclude or affect the rights of the customer in regard to the conformity of the goods
pursuant to the legal regulations. If the delivered product does not conform to the agreement, the customer has the
right to ask the seller to repair that lack of conformity without any reimbursement, by repair or change of the product
in accordance with the valid legal regulations.
CONTENT
0.0 Technical Characteristics of the Stove
1.0 The Purpose of this Manual
1.1 Updating
2.0 The Responsibility of the Manufacturer
2.1 The Basic Characteristics of the User
2.2 The Transportation and Use of the Stove – Handling
2.3 The Responsibility of the Installer
3.0 The Installation – Incorporation of the Stove
3.1 Placing the Stove
3.2 The Smoke Discharge System
3.3 The Insulation and Diameter of the Openings (Holes) on the Roof (or on the Wall)
3.4 The Intake of Combustion Air
3.5 The Connection to the Electric Power Supply
4.0 Important Instructions
5.0 Warning of the Safety Measures for the Maintenance Workers
5.1 Warning of the Safety Measures for the User
6.0 Standards for Safe Starting up and Cleaning the Stove
6.1 Routine Cleaning and Maintenance Performed by the User of the Stove
6.2 Inspection and Maintenance Places
6.3 Special Maintenance
7.0 Important Safety Information
8.0 The Quality of Fuel Pellets
8.1 Fuel Pellet Storage
9.0. Connection of the hydraulic installation
10.0. Pressure line and return duct
11.0. Furnace built-in components
11.1. Safety valve
11.2. Circulating pump
11.3. Automatic air vent valve
11.4. Expansion tank
11.5. Fill and drain cock
12.0. Filling the installation and putting into operation
13.0. Practical guidelines for using heating system
14.0. Filling with wood pellets
15. Description and functioning of the furnace operation controller
15.1. User interface
15.2. Operation mode
15.3. Flame appearance
