8
Heating flap is operated when button (Figure 5, Item 11) located above the oven door is
actuated. This button is used to shorten the ways of flue gases during firing.
Heating flap should be opened only in the stage of stove kindling.
During firing, open heating flap causes stove overheating and hence the damages of stove
parts.
Besides, open heating flap results in higher consumption of fuel.
Button not pressed = heating flap open
Button pressed = heating flap closed
3.4
OVEN DOOR
(Figure 1, Item 6)
Oven door can be set in one of two positions, by choice, depending on desired heat in the
room.
Oven door open
: higher radiation of heat for heating the room.
Oven door closed
: lower radiation of heat for heating the room.
Oven door can be removed without tools: handle of slightly opened door should be
gripped and the door pulled upwards. Reinstallation of the door is carried out by
introducing the both hinges into corresponding openings, on the oven front, while the
pressure is applied with knee on the lower door edge, along with simultaneous light
pulling the handle upwards.
When the cook-stove is in operation, oven door must be installed.
Fuel drawer
(Figure 1, Item 4)
In the lower part of the cook-stove, fuel compartment is located having sliding guides
which enable easy movement thereof.
Attention:
Easily inflammable materials should not be stored in that compartment, such
as paper etc.
When filling, take care of height.
4.
PUTTING THE COOK-STOVE INTO OPERATION
Before the first time the stove is lighted and fired
, enameled surfaces have to be erased
with soft dry cloth in order to prevent stain formation.
After getting acquainted with cook-stove operation, you can light the cook-stove for the
first time. The first time the cook-stove is operated, windows are to be open because
