3
Minigraf M3
1. GENERAL INFORMATION
1.4
WARRANTY
ALFAMACCHINE’s products are constructed to have a
long life and are tested one by one.
If, in spite of this if any damages or malfunctioning would
occur, the replacement of defective parts is warranted
(counting from the date written on the delivery bill) for a
period of:
- 24 months for mechanical components
- 12 months for pneumatic part
The driver blade is tested for about 1.000.000 working cycles.
The Warranty does not include the sending of technical
staff.
The repair interventions will be perofrmed at your local
distributor or ALFAMACCHINE’s plants and the freight of
the shipment will be entirely charged to the Customer.
Warranty does not cover the damages caused by an
inappropriate use of the machine or not corresponding to
the instructions described in this handbook.
The warranty decays in case of unauthorized modifications
or because of accidental damages or tampering performed
by unqualified personnel.
The warranty also decays in case you use V-nails different
from the original ALFAMACCHINE ones.
To take advantage of warranty services it is necessary at the
moment you receive your machine, to completely fill out the
warranty card and send it back as soon as possible to
ALFAMACCHINE. The warranty will be valid only after the
ALFAMACCHINE receives the warranty card & records it.
1.5
PRE-ARRANGEMENTS CHARGED TO
THE CUSTOMER
It is the customer’s duty on times agreed with the producer
to execute what is indicated in our documentation.
Things normally charged to the customer are:
•
Premises predisposition, included building works and/
or canalization eventually requested
•
Pneumatic supplyng of compressed air (see the paragraph
4.5)
1.6
HANDBOOK STRUCTURE
The customer must pay extreme attention to the indications
reported in this handbook. The proper Pre-Arrangement,
Installation and Use of the Machine, constitute the basis of
a correct customer-distributor relationship.
1.6.1 Object and contents
The goal of this handbook is to provide to the customer all
the necessary information so that they can properly use the
machine & be able to run it in complete autonomy and safety.
The handbook contains information concerning the technical
aspects, machine working and standstill, maintenance, spare
parts and safety. Before making any operation on the
machine, the qualified technicians and operators must
carefully read this handbook. In case of doubt about the
correct interpretation of these instructions, ask
ALFAMACCHINE or your local distributor to have the
problem explained.
1.6.2 Utilizers
This handbook is made both for the operators and technicians
authorized to perform the machine maintenance.
The operators can not execute operations reserved to the
the qualified technicians.
The producer does not answer to damages derived from
not-observing this prohibition
1.6.3 Preservation
The instruction handbook must be kept very closed to the
machine in a special container protecting it from liquids and
whatever could compromise its legibility
1.1
PRODUCER
The firm Alfamacchine can boast more than 10 years of
experience in the construction of Woodworking Machines.
It has acquired technological know-how, developed during
years of research in strict touch with manufacturing and
international commercialization. We offer the best warranty
that anyone can grant its customers.
TEL +39-0543-482711
FAX +39-0543-480770
1.2
ASSISTANCE CENTERS
ALFAMACCHINE is represented both in North & South
America by a numerous and prepared sales organization.
Contact our firm directly to get the name of your local
distributor.
For every need regarding Use, Maintenance or Request of
Spare Parts, the Customer is pleased to address to the
authorized service centers or directly to ALFAMACCHINE,
specifying the machine identification data impressed on the
plate.
1.3
CERTIFICATION
The machine is produced in conformity to the pertinent
European Community Norms in force at the moment of its
introduction on the market.
