23
A2M 200
8.1
SPARE PARTS LIST
Even though the machine has been submitted to several tests and functional checks, we listed below the components that we
suggest you have a minimum and sufficient set of. This will help guarantee the shortest possible downtime.
TABLE 8.1 - A
8.2
SPARE PARTS ORDERING
We remind you that only a qualified technician can repair the machine.
Thuerefore we suggest the intervention of your local distributor or ALFAMACCHINE’s Center of Technical Assistance,
which has the qualified staff, proper equipment and tools, and who uses original spare parts.
To order the spare parts listed above, follow the instructions listed in the paragraph 1.2
8. SPARE PARTS
COMPONENT
V-NAILS DRIVER BLADE
V-NAILS CLAW HEADS “L”
SHAPED SUPPORT (V-NAILS GUIDE)
7.3
REQUEST OF ASSISTANCE
For any information regarding Use, Maintenance, Installation, etc.. we remain at your disposal. The Customer has to formulate
clearly their questions by sending us a fax listing detailed descriptions of the problem. For eventual explanations you should
use this handbook and the instructions listed in the paragraph 1.2.
E_Mail: info@alfamacchine.com
FAX: +39-0543-783302
via Selva, 23/25 - 47122 Forlì - Italy
9 DEMOLITION
9.1
DEMOLITION
At the act of demolition it is necessary to separate the parts in plastic material from components. Sometimes they must be sent
to different gatherings respecting the current Norms.
Concerning the machine metallic mass, it is enough to subdivide the steel parts and those of other metals or alloys, for a proper
recycling by smelting.
10. ATTACHMENTS
10.1 SCHEMES
You can find here attached the following schemes:
- (A) Mechanic Schemes
- (B) Spare Parts List
- (C) CE conformity declaration FAC SIMILE
