6
A2M 200
2 . 9 TECHNICAL DATA
We have listed below the Machine’s data and technical
characteristics to which you can use for reference for any
eventual contact with your distributor for Technical
Assistance.
TABLE 2. 9 A - Data and Specifications
-
Frames thickness
min-max 6-90 mm.
-
Frames width
min-max 6-130 mm.
-
Max distance between Nails
min-max 175 mm.
-
V-nails magazine capacity
n. 220
-
V-nails size
7, 10, 15 mm.
-
V-nails size on request
3, 5, 12 mm.
-
Weight
about 38 kg
-
Height of working bench
1000 mm.
-
Overall dimensions
380x600x1150 mm.
2.10 STANDARD EQUIPMENT
The equipment listed below is standard.
2.10.4 Customized optional accessories
Thanks to its versatility this machine can be ‘custom-made’
to meet our users’ requirements, with additional accessories
that can make frame assembling easier: e.x. special fences
for peculiar moulding shapes, special clamps to ensure the
mouldings are locked properly during V-nail firing, and so
on. You can have your local machine shop make these for
you.
Figure 1
2.10.1 Standard accessories
Once you have removed the packaging, please check the
presence of the following accessories:).
-
N.1 nail head
mm. 7
-
N.1 nail head
mm.10
-
N.1 nail head
mm.15
-
N.1 L shaped pressure pad
-
N.1 Rounding pressure pad
-
N.1 Allen Wrench 5 mm. for V-nail head replacement
-
N.1 Allen Wrench 6 mm. for machine assembly
-
N.1 Brass rod magnet to remove V-nails
2.10.2 Upgrading and implementing of mechanical
parts
The machine has been realized following a modular criterion,
therefore the existing equipment can be further upgraded
with additional accessories that will not alter its basic
structure.
Technical upgrades on the machine model, if any, will be
such that they can be installed at any time without requiring
any substantial modifications to the machine structure.
2.10.3 Optional accessories
•
Adjustable tilting fences (see fig. 1)
•
Metallic working bench extension
•
V-nail claw heads size 3-5-12 mm.
