alfasolar GmbH
Ahrensburger Str. 4 6, 30659 Hannover
Geschäftsführer:
Dipl.-Ing. M. Denz (CEO) / Dipl.-Kfm. K.-W. Hoffmann (CFO)
Amtsgericht Hannover HRB 544 55
Gerichtsstand und Sitz: Hannover
Seite 11 von 29
Tel:
Fax:
Mail:
Web:
+49 (0) 511-261 447-0
+49 (0) 511-261 447-50
sales@alfasolar.de
www.alfasolar.de
Revision-Index:
Issued:
Doc.-Nr.
08
2012-12-13
ALE-IEC-01
3
Installation of alfasolar modules
3.1
General instructions
The fire rating of the modules is valid only when mounted in the manner specified in these
installation instructions.
Local circumstances such as local climate, wind loads, snow loads or special static require-
ments have to be considered by the installer. Local circumstances are not known by alfasolar
GmbH.
3.2
Exclusion of liability
Die Installation instructions are only valid for the standard modules of alfasolar solar module
series and the alfasolar A2 fastening system. Special constructions at the request of custom-
ers concerning the solar modules or the fastening system cannot be considered. To facilitate
your installation alfasolar GmbH gives special data for static calculations in the data sheets.
This introduction provides useful information on installing the A2 fastening system from al-
fasolar GmbH. In addition to this information, the specialized company installing the system is
to observe the rules and regulations applicable for this technology. The information on di-
mensions and spacing contained in this introduction are only guidelines based on practical
experience that must be validated only through static testing on a case-by-case basis. Al-
fasolar GmbH is not responsible for dimensioning information contained in sales materials
since generally not all technical requirements are verified in sales information. The installing
company is responsible for the mechanical durability of the installed interface connections on
the shell of the building and, in particular, for their tightness as well. The components sup-
plied by alfasolar GmbH are state of the art and designed to withstand the expected stress
and loads. Alfasolar GmbH shall not be held liable if the installed parts have been improperly
handled.
The exclusion of liability does not apply to damages arising from injury to life, limb or health
based on a negligent breach of duty of alfasolar GmbH or an intentional or negligent breach of
duty by a legal representative or vicarious agent of alfasolar GmbH. Please also refer to the
general terms and conditions as well as the publications of guarantee and performance of
alfasolar GmbH.
3.3
Product warranty
Alfasolar GmbH guarantees the lifespan and durability of the frame system for a period of ten
years provided the components have been handled properly and arranged according to the
static basic requirements and normal environmental and local conditions (Federal Republic of
Germany). This applies within the framework of environmental conditions, e.g., those fac-
tored into DIN 1055. The expected lifespan of the product, however, extends significantly be-
yond the lifespan stated in the warranty. Because the static dimensions stated for the system
cannot apply for all possible environmental conditions, but are instead based on the stipula-
tions of the applicable standards, we recommend always purchasing appropriate natural haz-
ard insurance.
