S e i t e
6 | 8
Remote Control
(1) On / Off Button
(2) Auto-Mode
(3) Ionizer on / off
(4) Fan speed
(5) – no function -
(6) Timer function
(7) Timer time selection
(8) Sleep-mode
(9) IF-Transmitter
Using the remote control
The functions are identical to the one to be adjusted on the air cleaner top side.
Point the remote at the front of the air purifier and select the desired setting.
8. Installation of the filter
Before using the air cleaner the first time, remove the foil packing from the filters inside.
1. Remove the front
panel as shown
2. Press down on the two
mounts of the prefilter and
remove the pre-filter.
3. Remove the filter
set as shown and
remove the foil
packing.
4. Place the filter back in and
fasten the front panel.
Note: If the front panel is not
installed correctly, the air
cleaner cannot be put into
operation.
Built in filters
The built in filters consists of a plastic pre-filter and the unit of cotton filters, HIMOP filter and HEPA filter.
