INSTALLATION MANUAL
FREE-STANDING SHOWER/ BATH MIXER
ITEM No. AB2534
*
Components Checking
LIST OF COMPONENTS:
Please double-check the components list hereinafter and contact us or our distributor for any unconformity.
Remarks: 1. Without affecting their efficiency, components may be changed without further notice.
2. Drawings for reference only. Product size & shape refer to actual faucet.
12
*Installation instructions:
I
I
I
I
I
I
I
I
I
I
I
�
*
Do not disassemble the main body, as it has been installed &
commissioned correctly & precisely before leaving the factory.
*
To avoid the faucet from jamming, do flush the water pipe before
installation.
Do
*
After installation, make sure every joint are safely sealed & no leaking. Not
The Component List
1.Main body
2.Decorative cover
3 Screw
4.Spring gasket
5.Protective board
6.Rubber plug
7.Base
8.Expansion plug
9.Hand shower
1 O.Shower hose
11.Protective ring
12.Allen Key
13.Manual
*
The nominal water pressure is (0.05 -1.0)Mpa(7.26psi-145psi), (including Disassemble
cold & hot water pressure), suitable for water temperature : 4 "C - 90°C.
Qty.
1
1
2
2
1
2
1
4
1
1
1
1
1
*
Make sure to connect the hot/cold inlet pipe correctly, if standing in front, hot water pipe connecting to the left
& cold water pipe connecting to the right.
-1-
