SINGLE - LEVER BATHROO
M
FAUCET
*
Installation procedures
1
1.1) Drill a hole of 035-038 on the installation
deck. 2) Remove the nut (7), gasket(6) and
washer C(5) from the main body. 3) Fix inlet
pipes(9) onto the main body(1 ).
3.
2.
2.With washer A(2), base plate(3) and washer
8(4) still on, put inlet pipes through deck hole,
and install the faucet with washer C(5), gasket
(6), nut(?) and screws(8) from under deck.
4.
3.After adjusting to proper position of the faucet 4.Connect two inlet pipes to angle valves, left
and base plate, fix the faucet by tightening nut oneto hot water and right one to cold water
(7) with a wrench and the two screws(8) with a supply. Turn on water to test tightness of all
Philips screwdriver.
joints to finish installation.
6