CUTTING DEPTH ADJUSTMENT
1. Pull up & lossen the Lock Lever(A) first Fig.13
2. Lift the back of the saw away from the baseplate
until the approximate depth is achieved.
3. Ensure the Lock Lever(A) Fig.14 is tightened securely
after the depth adjustment is made. To adjust the lock and
unlock positions(if necessary) simply pull the lever
towards the hand-grip of the saw, rotate it slightly as
required.
Warning: Cutting with a loose lock Lever invites injury.
OPERATION
Operation of Switch
Press the stop button (A) first and pull the
Trigger (B) at the same time to start rotating.
To stop rotating, release trigger Fig.15
Operation
Please use right hand(A) to to hold the rear Handle,
and left hand(B) hold the tool after The blade reaches
the maximum speed rate andpush forward the tool
along the surface of workpiece.Keep movingsmoothly
till the cut is finished as shown in Fig.16