free of any defect or damage.Ensure the saw is
disconnected from Power.
1. Pull out the height wrench (A)
Open the base (B) refer as Fig.1
2. Take out Hex wrench(A)
The size for Hex wrench is M6(B) refer as Fig.2
3. Push down the safety lever to fix the motor shaft Use the
Hex wrench to loose the shaft screw (anticlockwise)
and take out the shaft screw and flange .refer as Fig.3
4. Open the blade guard(A) check the inner flange put on
and match with blade's hole.(B) And make sure the blade
kerf is correct. Refer as Fig.4