17
The motor can be continuously adjusted on the slide by releasing the Allan screw
(for a maximum enlargement of the stroke when using twist drills, drill chucks and
tapping attachments).
Tapping
With the Quick Change Tapping Adaptor, there is the possibility to tap threads from M3 up to M 30.
Insert the Quick Change tapping Adaptor (1) in the arbor of the machine. Pay attention to a tight fit.
Subsequently mount the tap (3) in the tap collet (2).
Now insert the tap collet (2) with tap (3) in the Quick Change Tapping Adaptor (1).
Adjust the motor to the corresponding cutting speed.
It must be ensured that the tap is placed on the drill hole.
When stopping the forward motion proceed as follows:
Switch off motor.
P
ush button „Left-hand rotation“.
Switch on motor.
Lead back the tap.
Switch off the motor after tap is completely led back.
Left
–hand rotation is only activated when corresponding button was pushed which means that after stopping the
motor automatically the right
–hand rotation is activated.
Speed Control
Left-hand rotation
Summary of Contents for ROTABEST 100 RL - E
