3
Safety instructions
During work with this machine, improper handling and/or poor maintenance can result in significant hazards which
can lead to serious accidents with considerable injuries and destruction of the machine. Please read and observe
the information and safety instructions contained in this operating manual very carefully and contact the
manufacturer should you have any questions.
Always...
•
activate the switchable permanent magnet completely
•
activate the magnet on metallic, ferromagnetic materials
•
use the whole magnetic surface for working
•
work on level surfaces
•
clean the magnetic surface and keep it clear of dirt, chips, welding spatter
•
set the core drilling machine down gently to prevent damage to the magnetic surface
•
secure yourself with a safety belt when drilling on walls or ceilings
•
check connection cables for damage
•
make sure the incoming voltage matches the machine
•
follow the instructions in the operating manual
•
familiarize new users with the safe use of the machine and read and understand the operating
manual
•
wear safety goggles, safety gloves and ear protection during work
•
observe local, and country-specific guidelines
•
store in a dry place
Never...
•
work on round or curved objects, use a pipe adapter if this is necessary
•
drill several work pieces on top of one another
•
modify the core drilling machine or remove signs
•
use the core drilling machine when damaged or when parts are missing
•
strain or damage the underside of the magnet through heavy impact or blows
•
use the core drilling machine without having been properly instructed
•
use the core drilling machine to support, lift or transport persons or loads
•
carry out electric welding work on the work piece at the same time as using the core drilling
machine
•
store or operate the core drilling machine at temperatures above 50°C (122°F)
•
leave the machine hanging unsupervised
•
allow the machine to come into contact with corrosive materials
People with cardiac pacemakers or other medical appliances may only use the lifting magnet
following approval by their physician.
Proper use
This device, a magnetic core drilling machine with switchable magnetic clamp, is intended for drilling with core or
solid drills on ferromagnetic work pieces. It may only be used in a dry environment which is protected from the
weather. The machine may be used horizontally, vertically or overhead.
Summary of Contents for ROTABEST RB 50 SP
Page 22: ...22 Spare Parts ...
Page 24: ...24 Exploded drawing motor ...
Page 26: ...26 ...
Page 27: ...27 ...
